Electric Vehicle Charging Cable 16A, 3 Phase, from three-phase outlet to Type 2 connector

Charging Cable 480 V – Type 2 (16A, 3 Phase, 11 kW) – a compact 5 meters long electric vehicle charging cable, compatible with the European Type 2 standard. Safety is ensured by leakage, overload, and overheating protection. An LED display shows charging parameters, and the current is adjustable by a button.

Specification:

• Power Plug:
• Protection grade: IP54 (operating condition)
• Contact Material: Copper alloy, silver + thermoplastic on top
• Input power: 480 V AC
• Output power: 11 KW
• Total length: 5 meters
• Mechanical service life: Plug in / unplug > 10000 times
• External force impact: Can withstand 1 m fall and 2 t vehicle pressure
• Insulation resistance: > 1000MD (DC500V)
• Terminal temperature rise: <50K
• Housing fire resistance: UL94V-0. Make charging simple and safe!
(Fire resistance level introduction: The level of antipyrene plastic gradually increases from HB, V-2, V-1 to V-0. About UL94V-0: After two 10s flame application tests, the flame extinguishes within 10 seconds. No falling flaming particles.)

Features:

The screen displays real charging status data (charging duration, charging power in kW, temperature, how much kWh of electricity consumed)

This is a compact portable electric vehicle charging cable, which is an ideal solution for cost-effectively charging your electric vehicle at work, on trips, or at any location with a domestic outlet

Charging cable includes these protections:

1. Leakage protection

2. Protection against overvoltage or undervoltage

3. Overload protection

4. Short-circuit protection

5. Overheating protection

Protection from temperature, therefore charging is safe!

When the control box temperature exceeds 85°C, protection will stop charging and will resume charging when the temperature drops to 65 °C.

LED display shows:

1. Charging temperature

2. Charging current

3. Charging voltage

4. Energy charged in KW/h

5. Charging time.

6. Set the current (adjustable 10 13 16 A)

7. Charging speed in kW

How to use:

The blue button is for adjusting the current. To change the current, press the blue button. When adjusting the current, the power plug is always connected, Type 1 SAE J1772 (or Type 2) plug is disconnected. Once you have set the desired current, connect it and start charging.

Type 2 – The European standard used by electric vehicles manufactured in Europe, such as: Volkswagen e-Up!, Hyundai Ioniq, Renault ZOE, Nissan Leaf, and European market versions of Volkswagen e-Golf or BMW i3 among others