Charging Cable 480 V - type 2 (16A, 3 phase 11 kW)

  • Charging Cable 480 V - type 2 (16A, 3 phase 11 kW)

    Code: 480V - type 2, 11kW
    Leasing calculators
    • sbl
    • ml
    Power
    11 kW
    Cable length
    5 m
    Cable form
    Straight
    Cable type
    type 2
  •  

     

    Electric Vehicle Charging Cable 16A, 3 phase, from domestic socket 220V and three-phase socket to type 2 connector


    Specifications:

    • Plug: IEC62196 type 2 or
    • Power plug:
    • Protection grade: IP54 (operational condition)
    • Contact core: copper alloy, silver + thermoplastic on top
    • Input power: 480 V AC
    • Output power: 11 KW
    • Total length: 5 meters
    • Mechanical lifespan: connect / disconnect > 10000 times
    • External force resistance: can withstand a 1m drop and 2t vehicle pressure
    • Insulation resistance: > 1000MΩ (DC500V)
    • Terminal temperature rise: <50K
    • Housing fire resistance: UL94V-0. Make charging simple and safe!
    (Introduction to fire protection level: The level of antipyrene plastic gradually increases from HB, V-2, V-1 to V-0. About UL94V-0: After two 10-second flammability tests, the flame dies out within 10 seconds. No flaming droplets shall fall.)

     

    Features:

    The screen displays real-time charging status data (charging duration, charging power kW, temperature, how much kWh of electricity used)

     

    This is a compact portable electric vehicle charging cable, which is an ideal solution for affordably charging your electric vehicle at work, on trips, or at any place with a domestic socket

    Installed protections in the charging cable include:

    1. Leakage protection

    2. Overvoltage or undervoltage protection

    3. Overload protection

    4. Short-circuit protection

    5. Overheating protection

     

    Temperature protection ensures safe charging!

    When the control unit temperature exceeds 85°C, protection will stop charging and resume charging when the temperature drops back to 65°C.

     

    LED display shows:

    1. Charging temperature

    2. Charging current

    3. Charging voltage

    4. Energy charged KW / h

    5. Charging time.

    6. Set current (adjustable 10 13 16 A)

    7. Charging rate kW


    How to use:

    The blue button is for adjusting current. To change the current, press the blue button. While adjusting the current, the power plug is always connected, 1 type SAE J1772 (or type 2) plug is disconnected. Once the desired current is obtained, connect it and start charging.  

    Type 2 – European standard used by electric vehicles manufactured in Europe, such as: Volkswagen e-Up!, Hyundai Ioniq, Renault ZOE, Nissan Leaf, as well as European market-targeted Volkswagen e-Golf or BMW i3 among others  

  •