Three-phase charging cable 480V - Type 2 (16A, 11 kW) - is a compact portable charging cable designed for electric vehicles. It supports up to 11 kW power, has a 5 m length and a Type 2 connector (European standard). Built-in overload, overheating, short-circuit, and leakage protections ensure safe charging.

Electric vehicle charging cable 16A, 3 phase, from three-phase socket to type 2 connector with WI-Fi function

Specifications:

• Power plug:
• Protection rating: IP54 (operational condition)
• Contact surface: copper alloy, silver + thermoplastic on top
• Input power: 480 V AC
• Output power: 11 KW
• Total length: 5 meters
• Mechanical lifetime: plug in / out > 10000 times
• External force impact: can withstand a 1 m drop and a 2-ton vehicle pressure
• Insulation resistance: > 1000MD (DC500V)
• Terminal temperature rise: <50K
• Housing flammability resistance: UL94V-0. Make charging simple and safe!
(Fire resistance grade introduction: The grade of antipyren plastic gradually increases from HB, V-2, V-1 to V-0. About UL94V-0: after two 10s burning tests, the flame goes out within 10 seconds. No dropping of flaming particles.)

Features:

The screen displays actual charging status data (charging duration, charging power in kW, temperature, electricity consumed in kWh)

This is a compact portable electric vehicle charging cable, which is an ideal solution for cheaply charging an electric car at work, on trips, or in other places where there is a domestic socket

The following protections are installed in the charging cable:

1. Leakage protection

2. Over-voltage or low-voltage protection

3. Overload protection

4. Short-circuit protection

5. Overheating protection

Temperature protection, thus charging is safe!

When the control box temperature exceeds 85°C, the protection will stop charging and will start charging again once the temperature drops to 65°C.

LED display shows:

1. Charging temperature

2. Charging current

3. Charging voltage

4. Energy charged in kW/h

5. Charging time.

6. Set current (adjustable to 10 13 16 A)

7. Charging speed in kW

How to use:

The blue button is for adjusting the current. To change the current, press the blue button. When adjusting the current, the power plug is always connected, 1 type SAE J1772 (or type 2) plug is disconnected. Once you achieve the desired current, connect it and start charging.

Type 2 - The European standard used by electric vehicles manufactured in Europe, such as: Volkswagen e-Up!, Hyundai Ioniq, Renault ZOE, Nissan Leaf, as well as Volkswagen e-Golf and BMW i3 intended for the European market and others.