The original Etron charging cable 16A, 3 phases, from a domestic 220V socket and three-phase socket to type 2 connector

Specification:

• Plug: IEC62196 type 2 or
• Power plug:
• Protection degree: IP54 (operational condition)
• Contact material: copper alloy, silver + thermoplastic on top
• Input power: 480 V AC
• Output power: 11 KW
• Total length: 5 meters
• Mechanical life: plug in / unplug > 10000 times
• External force impact: can withstand a 1 m drop and 2 t vehicle pressure
• Insulation resistance: > 1000MΩ (DC500V)
• Terminal temperature rise: <50K
• Housing fire resistance: UL94V-0. Make charging simple and safe!
(Fireproof level introduction: the grade of antipyrene plastic gradually increases from HB, V-2, V-1 to V-0. About UL94V-0: after undergoing two 10s burning tests, the flame extinguishes within 10 seconds. No burning objects should fall.)

Features:

This is a compact portable electric vehicle charging cable, which is an ideal solution for low-cost charging of an electric car at work, on trips, or in any location with a domestic socket

The charging cable is equipped with the following protections:

1. Leakage protection

2. Over-voltage or under-voltage protection

3. Overload protection

4. Short-circuit protection

5. Overheating protection

Temperature protection ensures safe charging!

When the control box temperature exceeds 85°C, the protection will stop charging and will start charging again when the temperature drops below 65 °C.

Usage:

The blue button is for adjusting the current. To change the current, press the blue button. While adjusting the current, the power plug is always connected, 1 type SAE J1772 (or type 2) plug is disconnected. When you achieve the desired current, connect it and start charging.

Type 2 – European standard, used by electric vehicles manufactured in Europe, such as: Volkswagen e-Up!, Hyundai Ioniq, Renault ZOE, Nissan Leaf, and European market Volkswagen e-Golf or BMW i3 or others