Charging Cable 32A, 1 Phase, from a domestic socket 220V to a Type 2 connector

Specification:

• Plug: IEC62196 Type 2
• Power Plug: CEE 3 pins
• Protection Degree: IP54 (operating condition)
• Contact insert: copper alloy, silver + thermoplastic on top
• Input Power: 110V-250V AC
• Output Power: 7.2 kW
• Total Length: 5 meters
• Mechanical Life: plug/unplug> 10000 times
• External Force Impact: can withstand a 1 m fall and a 2 t vehicle pressure
• Insulation Resistance: > 1000MΩ (DC500V)
• Terminal Temperature Rise: <50K
• Housing Flame Resistance: UL94V-0. Make charging simple and safe!
 (Introduction to fire protection level: the level of antipyrene plastic gradually increases from HB, V-2, V-1 to V-0. About UL94V-0: after conducting two 10S specimen burning tests, the flame went out within 10 seconds. No burning objects should fall.)

Features:

Real-time charging status data displayed on the screen (charging duration, charging power in kW, temperature, how much kWh electricity consumed)

This is a compact portable electric vehicle charging cable, which is an ideal solution for inexpensively charging your electric vehicle at work, on trips, or anywhere else where there’s a domestic socket

Included protections in the charging cable:

 1. Leakage protection

 2. Over-voltage or under-voltage protection

 3. Overload protection

 4. Short-circuit protection

 5. Overheating protection

Temperature protection makes charging safe!

When the control box temperature exceeds 85°C, the protection will stop charging and will resume charging once the temperature drops below 65 °C.

LED display shows:

1. Charging temperature

2. Charging current

3. Charging voltage

4. Energy charged in KW/h

5. Charging time.

6. Set current (adjustable 10 13 16 20 24 32A) 

7. Charging speed in kW

Usage method:

The blue button is for adjusting the current. To change the current, press the blue button. While adjusting the current, the power plug is always connected, 1 type SAE J1772 (or type 2) plug is disconnected. When you have selected the desired current, connect it and start charging.